[May-2018-New]100% Real 70-743 PDF 237Q-Braindump2go[131-141]

2018 May New Microsoft 70-743 Exam Dumps with PDF and VCE Just Updated Today! Following are some new 70-743 Real Exam Questions:

1.|2018 Latest 70-743 Exam Dumps (PDF & VCE) 237Q Download:

https://www.braindump2go.com/70-743.html

2.|2018 Latest 70-743 Exam Questions & Answers Download:

https://drive.google.com/drive/folders/0B75b5xYLjSSNUVNnV1llcTVXV2M?usp=sharing

QUESTION 131
Hotspot Question
You have a server named Server1 that runs Windows Server 2016.
Server1 is a Hyper-V host.
You run the commands shown in the following graphic:

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

Answer:

QUESTION 132
Drag and Drop Question
You have a file server named Server1 that runs Windows Server 2016.
You need to create a report that lists all of the sharp permissions assigned to the security principals on Server1.
How should you complete the command? To answer, drag the appropriate cmdlets to the correct targets. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

Answer:

QUESTION 133
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
The domain contains a member server named Server1 that runs Windows Server 2016.
Server1 has IP Address Management (IPAM) installed. IPAM uses a Windows Internal Database.
You install Microsoft SQL Server on Server1.
You plan to move the IPAM database to SQL Server.
You need to create a SQL Server login for the IPAM service account.
For which user should you create the login? To answer, select the appropriate options in the answer area.

Answer:

Explanation:
https://blogs.technet.microsoft.com/yagmurs/2014/07/31/moving-ipam-database-from-windows-internal-database-wid-to-sql-server-located-on-the-same-server/

QUESTION 134
Drag and Drop Question
You have a server named Server1 that runs Windows Server 2016.
On Server1 you use the Basic template to create a new Data Collector Set named CollectorSet1.
You need to configure data collection for the performance counters.
The configuration must support the following requirements:
-Data collection must run on a schedule.
-Data collection must stop if there is less than 1 GB of free disk space.
What should you modify to meet each requirement? To answer, drag the appropriate settings to the correct requirements. Each setting may be used once, more than once, or nor at all. You may need to drag the Split bar between panes or scroll to view content.

Answer:

QUESTION 135
Drag and Drop Question
Your network contains an Active Directory domain. The domain contains two domain controllers named DC1 and DC2. DC2 is a virtual machine that is hosted on a Hyper-V host named HyperV1. DC1 holds the PDC emulator operations master role.
You need to create a new domain controller named DC3 by using domain controller cloning.
Which five actions should you perform in sequence before you can import the cloned virtual machine? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.

Answer:

Explanation:
http://www.ajsnetworking.com/cloning-windows-server-2016-domain-controllers/

QUESTION 136
Hotspot Question
You have an Active Directory domain named Contoso.com.
The domain contains Hyper-V hosts named Server1 and Server2 that run Windows Server 2016.
The Hyper-V hosts are configured to use NVGRE for network virtualization.
You have six virtual machines that are connected to an external switch. The virtual machines are configured as shown.

To which virtual machine or virtual machines can VM1 and VM3 connect? To answer, select the appropriate options in the answer area.

Answer:

Explanation:
The GRE keys must match.
To separate the traffic between the two virtualized networks, the GRE headers on the tunneled packets include a GRE Key that provides a unique Virtual Subnet ID for each virtualized network.
References:
https://blogs.technet.microsoft.com/keithmayer/2012/10/08/step-by-step-hyper-v-network-virtualization-31-days-of-favorite-features-in-winserv-2012-part-8-of-31/

QUESTION 137
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
The domain contains two servers named Server1 and Server2 that run Windows Server 2016.
Server1 has Microsoft System Center 2016 Virtual Machine Manager (VMM) installed. Server2 has IP Address Management (IPAM) installed.
You create a domain user named User1.
You need to integrate IPAM and VMM. VMM must use the account of User1 to manage IPAM. The solution must use the principle of least privilege.
What should you do on each server? To answer, select the appropriate options in the answer area.

Answer:

Explanation:
https://technet.microsoft.com/en-us/library/dn783349(v=ws.11).aspx

QUESTION 138
Hotspot Question
You have four Hyper-V hosts named Server1, Server2, Server3 and Server4 that run Windows Server 2016. The hosts are nodes in a failover cluster.
The failover cluster is configured to balance virtual machines when a node is more than 80 percent loaded.
You need to configure the failover cluster to balance the virtual machines when the load of a node is more than five percent higher than the average for the nodes.
Which command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation:
https://www.vembu.com/blog/hyper-v-virtual-machine-load-balancing/

QUESTION 139
Hotspot Question
Your network contains an Active Directory domain named contoso.com.
The domain contains two servers named Server1 and Server2 that run Windows Server 2016.
Server1 has IP Address Management (IPAM) installed. Server2 has the DHCP Server role installed. The IPAM server retrieves data from Server2.
The domain has two users named User1 and User2 and a group named Group1. User1 is the only member of Group1.
Server1 has one IPAM access policy. You edit the access policy as shown in the Policy exhibit. (Click the Exhibit button.)

The DHCP scopes are configured as shown in the Scopes exhibit. (Click the Exhibit button.)

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Answer:

QUESTION 140
Hotspot Question
You have a server named Server1 that runs Windows Server 2016 and has a Hyper-V server role installed.
You open Disk Management on Server1 as shown in the following graphic.

You plan to configure Disk 13 as a pass-through disk for a generation 1 virtual machine.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

Answer:

QUESTION 141
Drag and Drop Question
You have a server named Server1 that runs Windows Server 2016.
You need to deploy the first cluster node of a Network Controller cluster.
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.

Answer:

Explanation:
Deploy Network Controller using Windows PowerShell
Step 1: Install-WindowsFeature
Install the Network Controller server role
To install Network Controller by using Windows PowerShell, type the following commands at a Windows PowerShell prompt, and then press ENTER. Install-WindowsFeature -Name NetworkController ­IncludeManagementTools
Step 2: New-NetworkControllerNodeObject
You can create a Network Controller cluster by creating a node object andthen configuring the cluster.
You need to create a node object for each computer or VM that is a member of the Network Controller cluster.
Tocreate a node object, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
New-NetworkControllerNodeObject ­Name <string> -Server<String> -FaultDomain <string>-RestInte
Step 3: Install-NetworkControllerCluster
To configure the cluster, typethe following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
Install-NetworkControllerCluster ­Node <NetworkControllerNode[]> ­ClusterAuthentication …
Step 4: Install-NetworkController
To configure the Network Controller application, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment. Install-NetworkController ­Node <NetworkControllerNode[]> ­ClientAuthentication
References:
https://technet.microsoft.com/en-us/library/mt282165.aspx


!!!RECOMMEND!!!

1.|2018 Latest 70-743 Exam Dumps (PDF & VCE) 237Q Download:

https://www.braindump2go.com/70-743.html

2.|2018 Latest 70-743 Study Guide Video:

https://youtu.be/wEPdR7Qdgsg

         

Braindump2go Testking Pass4sure Actualtests Others
$99.99 $124.99 $125.99 $189 $29.99/$49.99
Up-to-Dated
Real Questions
Error Correction
Printable PDF
Premium VCE
VCE Simulator
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back